Tuesday, February 21, 2017

OSHA 40 Hour Hazwoper Training Online - Now Mobile Friendly!

Our 40-hour HAZWOPER online course has been completely revised in fall 2016 to meet the latest 2016 HAZWOPER standards. It is now mobile friendly and may be taken on most any modern tablet as well as laptops and desktops by MAC and PC makers. The course is encoded in HTML 5 and does not use Flash.

In addition, we have reduced the price from $350.00 to only $234.50. An all-time low price for us to celebrate the introduction of the mobile friendly course that so many of our customers have asked for. Save 33% Now!

OSHA CFR 1910.120(e) states that General Site Workers must receive 40 hours of training off site. A General Site Worker is one who works on the site every day and is typically exposed to hazardous materials that are equal to or over the Permissable Exposure Level.

The General Site Worker must also receive at least three days of actual field experience under a trained, seasoned supervisor. The three days field experience under a trained, experienced supervisor are the responsibility of the student's employer or potential employer. It is important to note that the worker must have completed the 40 hours of off-site training before entering the jobsite.

Occasional Site Workers are those who are only exposed to under the Permissible Exposure Limits (PEL). These workers are typically managers, supervisors, surveyors, dirvers, etc. Those workers may take the 24 Hour Hazwoper Course. The Occasional Site Worker only needs one(1) day of field experience as certified by their employer.

The 40 hour Hazwoper training course is specifically designed for workers who are involved in clean-up operations, voluntary clean-up operations, emergency response operations, and storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste sites.

Sale Price! Was $350.00 - Save 33% - Now Only $234.50

Click on the Graphic Below to Purchase

 Este curso est? disponible en espa?ol. Inscr?base aqu?

Este curso est? disponible en espa?ol. Inscr?base aqu?

This course fulfills your requirements for certification under 29 CFR 1910.120(e)(3)(i) for general industry and 29 CFR 1926.65(e)(3)(i) for construction, or other applicable state regulations for certification to the 40-hour General Site Worker level.

Who is covered by OSHA's HAZWOPER STANDARD?

The Hazardous Waste Operations and Emergency Response Standard (HAZWOPER) applies to five distinct groups of employers and their employees.

This includes any employees who are exposed or potentially exposed to hazardous substances -- including hazardous waste -- and who are engaged in one of the following operations as specified by 1910.120(a)(1)(i-v) and 1926.65(a)(1)(i-v):

  • Clean-up operations -- required by a governmental body, whether federal, state, local, or other involving hazardous substances -- that are conducted at uncontrolled hazardous waste sites;
  • Corrective actions involving clean-up operations at sites covered by the Resource Conservation and Recovery Act of 1976 (RCRA) as amended (42 U.S.C. 6901 et seq.);
  • Voluntary clean-up operations at sites recognized by federal, state, local, or other governmental body as uncontrolled hazardous waste sites;
  • Operations involving hazardous wastes that are conducted at treatment, storage, and disposal facilities regulated by Title 40 Code of Federal Regulations Parts 264 and 265 pursuant to RCRA, or by agencies under agreement with U.S. Environmental Protection Agency to implement RCRA regulations; and
  • Emergency response operations for releases of, or substantial threats of releases of, hazardous substances regardless of the location of the hazard.

OSHA Online 40-Hour HAZWOPER Training - Save 33% Now!

This course is 100% online with full narration and includes interactive exercises, tests and engaging course material. You will learn different hazard management and hazardous waste regulations per OSHA and other federal safety agency standards.

Enroll Now in our 40-hour HAZWOPER Online CourseSale Price - Was $350.00 Now Only $234.50

To make our Safety Unlimited 40 Hour Hazwoper Course more affordable we are now offering a discounted price of only $234.25. Click on the graphic to the right and you will only be charged $234.50 for the course!

Immediate Downloadable Certificate Upon Completion Plus Laminated Wallet Card by Mail

Once you successfully complete your 40 Hour HAZWOPER training, you may download, save or print a certificate of completion. A PVC credit card type wallet ID, with optional photo, is mailed within 24 hours by US mail to the address supplied when you enroll. Please be sure that your address is correct in your account

Instructor Hotline

A qualified HAZWOPER instructor will be available to you by using our instructor hotline or e-mail us your questions. You will typically receive a response within an hour and be guaranteed one within 24 hours. This is a critical advantage to our quality program.

Hazwoper 40 Hour Course Time to Completion

Once you enroll in the OSHAHAZWOPER 40 Hour Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.

Required Annual Refresher Training

OSHA requires that employees, managers and supervisors need to successfully complete an 8-Hour refresher course annually after the initial 24 or 40 hour HAZWOPER training course. We offer 8-hour OSHA HAZWOPER refresher courses for employees and supervisors on our HAZWOPER menu at the top of this page.

Fully Narrated and Interactive Course

This course is 100% online with full narration and includes interactive exercises, tests and engaging course material. You will learn different hazard management and hazardous waste regulations per OSHA and other federal safety agency standards. The entire course consists of 5 modules containing 23 lessons.

<

Enroll Now in our 40-hour HAZWOPER Online CourseSale Price - Was $350.00 Now Only $234.50

To make our Safety Unlimited 40 Hour Hazwoper Course more affordable we are now offering a discounted price of only $234.25. Click on the graphic to the right and you will only be charged $234.50 for the course!

Course Pre-Requisite: None

Hazwoper 40 Hour Course Testing

This course has 10 modules, and nine of the modules have an exam. The tenth module consists of videos and does not have an exam.

Students are required to complete each exam once they complete all the sections within the corresponding module. The intention is that students take the corresponding exam while the information is still fresh. THERE IS NO FINAL EXAM.

Each exam consists of 20 questions randomly selected from a large pool of questions. A 70% score or better is required to pass each exam. If a student does not pass the exam the first time, they may retake the exam as many times as necessary in order to pass.

Learning Outcomes - Hazwoper 40 Hour

  • Describe OSHA and the HAZWOPER Regulation and additional laws associated with the HAZWOPER worker;
  • Describe the training requirements for HAZWOPER workers;
  • Explain the importance of an effective Safety and Health Program;
  • List the components of an effective Medical Surveillance Program;
  • Perform site characterization and control by identifying site hazards and implementing steps to minimize these hazards;
  • Recognize hazardous substances and research their hazards utilizing various reference sources;
  • Understand basic toxicology principles and their relationship to chemical exposure;
  • Select and utilize proper personal protective equipment (PPE) for the HAZWOPER worker;
  • Understand medical considerations of using Chemical Protective Clothing (CPC);
  • Understand decontamination methods and the principles of decontamination;
  • Understand the physical and chemical properties of hazardous substances;
  • Understand the importance of emergency preparedness;
  • Demonstrate an awareness of confined spaces;
  • Understand the OSHA Hazardous Communication Standard;
  • Perform hazardous substance spill and containment techniques;
  • Describe various sampling methods and procedures; and
  • Understand the detection and monitoring tools available to the HAZWOPER worker.

Topics Covered

  1. OSHA 40 Hour HAZWOPER Training Overview
  2. Module 1 Legal Issues
  3. Module One Overview
  4. Introduction to OSHA
  5. Introduction to HAZWOPER
  6. HAZWOPER Training
  7. Regulatory Compliance
  8. Safety and Health Program
  9. Medical Surveillance
  10. Module 1 Exam
    Module 2 Toxicology
  11. Module Two Overview
  12. Introduction to Toxicology
  13. Importance of Dosage
  14. Types of Toxic Substances
  15. Toxicological Effects
  16. Factors Influencing Toxicity
  17. Module 2 Exam
    Module 3 Chemical Hazards
  18. Module 3 Overview
  19. Introduction to Industrial Hygiene
  20. Bilogical Hazards
  21. Hazard Communication
  22. Physical and Chemical Properties
  23. Introduction to Radiation
  24. Module 3 Exam
    Module 4 Physical Hazards
  25. Module 4 Overview
  26. Walking and Working Surfaces
  27. Fall Prevention and Protection
  28. Electrical Hazards
  29. Confined Spaces Introduction
  30. Cold Illnesses and Injuries
  31. Heat Illnesses and Injuries
  32. Using the Heat Index
  33. Respirator Maintenance and Care
  34. Other Physical Hazards
  35. Module 4 Exam
    Module 5 Basic PPE Overview
  36. Module 5 Overview
  37. Introduction to Personal Protective Equipment
  38. Introduction to Respiratory Protection
  39. Introduction to Chemical Protective Clothing
  40. Introduction to Monitoring and Detection
  41. PPE for the Head, Eyes, Face, and Ears
  42. PPE for the Hands and Feet
  43. Module 5 Exam
    Module 6 Waste Site Operations
  44. Module 6 Overview
  45. Site Characterization and Analysis
  46. Site Control Tactics and Strategy
  47. Job Hazard Analysis
  48. Handling Drums and Containers
  49. Sampling Methods and Procedures
  50. Managing Chemical Spills
  51. Introduction to Decontamination
  52. Emergency Response
  53. Understanding Temporary HAZWOPER Worksites
  54. Module 6 Exam
    Module 7 Using Respiratory Protection
  55. Module 7 Overview
  56. Using Respiratory Protection
  57. Types of Respiratory Protection
  58. Respirator Selection and Use
  59. Respirator Medical Evaluation
  60. Respirator Fit Testing
  61. Respirator Training Requirements
  62. Respirator Maintenance and Care
  63. Module 7 Exam
    Module 8 Using Chemical Protective Clothing (CPC)
  64. Module 8 Overview
  65. Medical Considerations for Wearing CPC
  66. Using Chemical Protective Clothing
  67. Chemical Protective Clothing Selection
  68. Chemical Protective Clothing Classifications
  69. Donning and Doffing CPC
  70. Inspection Storage and Maintenance of CPC
  71. Decontaminating and Cleaning CPC
  72. Module 8 Exam
    Module 9 Using Monitoring and Detection Devices
  73. Module 9 Overview
  74. Preventing Sparks During Gas Detection
  75. Sensor Technology
  76. Types of Gas Detection Systems
  77. Using Colorimetric Tubes
  78. Using Combustible Gas Indicators
  79. FIDs and PIDs
  80. Other Detection Devices
  81. Module 9 Exam
    Module 10 Video Equipment Familiarization
  82. Module 10 Overview
  83. Video - Respirators
  84. Video - Level A
  85. Video - Level B
  86. Video - CPC Components and Accessories
  87. Video - Monitoring and Detection
  88. Video - Miscellaneous Tools and Equipment
  89. Video - Decontamination
  90. No Module 10 Exam
    Conclusion
  91. Summary and Conclusion