Sunday, September 24, 2017

Wyoming - OSHA 10 Hour and 30 Hour Outreach Training Online

National Safety Training offers the AdvanceOnline Solutions OSHA Outreach training courses that are accepted nationwide and throughout the state of Wyoming. The OSHA 10 hour training and OSHA 30 hour training courses below can be taken for all workers in Wyoming that need OSHA Outreach 10 hour or 30 hour cards. In addition, if you relocate to another state, the same card will be honored there.

Simply click on the appropriate construction or general industry "$79 Enroll Now" button below to purchase and begin your OSHA 10 hour course or the "$169 Enroll Now" button to purchase and begin your OSHA 30 hour construction course. You may begin your course now or later. You may take the course at your own pace, login and logout as needed. The course is 100% online and is available 24/7. We offer US based technical support by telephone and email. Once you start the course, you will have access to an authorized trainer for any content related questions via your student interface.

OSHA 10 Hour Construction Outreach Training Course

The OSHA 10 hour Outreach construction course is intended for construction workers and supervisors, and anyone involved in the construction industry. Get your OSHA 10 hour Outreach construction training here!

Click on the Graphic Below to Buy Now!
Osha 10 Hour Overview

Read more about OSHA 10 hour Construction Training

OSHA 10 Hour General Industry Outreach Training Course

The OSHA 10 hour General Industry course is intended for workers and supervisors, and anyone involved in plants, manufacturing and health-care industries. Get your OSHA 10 Hour General Industry Training here!

Click on the Graphic Below to Buy Now!
Osha 10 Hour Overview

Read more about OSHA 10 hour General Industry Training


OSHA 30 Hour Construction Outreach Training Course

The OSHA 30 hour Outreach construction course is intended for construction workers and supervisors, and anyone involved in the construction industry. Typically managers, supervisors, foremen, architects and engineers will take the 30 hour construction course and site workers will take the 10 hour course. Get your OSHA 30 hour Outreach construction training here!

Click on the Graphic Below to Buy Now!
Osha 10 Hour Overview

Read more about OSHA 30 hour Construction Industry Training


A temporary certificate of completion may be printed immediately following the successful completion of the course. You may submit the certificate to your employer and regulatory agencies as proof of your training while you are waiting for the hard copy to be sent to you. You'll receive your US Department of Labor OSHA 10 hour card or 30 hour card by US Mail within four to eight weeks.

OSHA recommends Outreach training program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job.

OSHA has issued a new policy that limits all OSHA Outreach training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA Outreach courses. As a result, all 10 hour courses must be delivered over a minimum of two days and all 30 hour courses must be delivered over a minimum of 4 days. In addition, OSHA has also issued a new policy of Program Jurisdiction Restrictions. Outreach training programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).


OSHA Accepted Online Training Provider

Online Outreach Training Providers must receive acceptance of their courses from OSHA prior to making them available to their students. The OSHA Outreach courses on this website are presented in alliance with AdvanceOnline Solutions of Houston, Texas.

Advance Online Certification

The official OSHA.gov website now lists OSHA-Authorized Online Outreach Training Providers. The OSHA Outreach Courses produced by AdvanceOnline Solutions are on the official list of Authorized-Providers.

AdvanceOnline Solutions is an authorized provider of the following (3) OSHA Outreach courses: 10 Hour Construction, 10 Hour General Industry and 30 Hour Construction. Upon satisfactory completion of the Outreach course, you will receive your OSHA 10 or 30 hour card from the US Department of Labor and the card is valid nationwide!

IACET IACET Continuing Education Units - AdvanceOnline Solutions, Inc. has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102; (703) 506-3275.

In obtaining this approval, AdvanceOnline Solutions Inc. has demonstrated that it complies with the ANSI/IACET Standard which is recognized internationally as a standard of good practice. As a result of their Authorized Provider accreditation status, AdvanceOnline Solutions, Inc. is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard.


Wyoming OSHA Training Information

Wyoming

The Wyoming OSHA plan operates under the umbrella of the Worker Safety and Compensation Division which is in the Wyoming Department of Employment. The main office is located in Cheyenne, Wyoming with three satellite offices in Casper, Gillette and Rock Springs.

The Wyoming State Plan applies to all public and private sector places of employment in the State, with the exception of Federal employees (including those employed at Yellowstone and Grand Teton National Parks), the United States Postal Service (USPS), private sector maritime, employment at Warren Air Force Base and at the Naval Petroleum and Oil Shale Reserve in Casper, and certain agricultural related operations (field sanitation and temporary labor camps), which are subject to Federal OSHA jurisdiction.

The Wyoming State Plan adopts all federal standards identically except for 1910 Subpart A, B, and C, and 1926 Subpart A and B, which have been reworded to reflect the Wyoming's Safety Act. New standards are promulgated by the state of Wyoming within six months of promulgation by the Secretary of Labor. Wyoming cannot adopt standards that are more stringent than corresponding federal standards, but can adopt standards for industries not covered by federal OSHA. Wyoming has adopted the federal recordkeeping and reporting requirements identical to the federal rule, 29 CFR 1904.

Wyoming has unique standards that cover Oil and Gas Well Drilling, Servicing, Special Servicing and Anchor Tester Requirements. Federal OSHA does not have specific standards for this industry. Since Wyoming does not have jurisdiction in maritime industries, the state has not adopted 29 CFR 1915, 1916, 1917, or 1918 or a state equivalent.

Contact Information for Wyoming OSHA is Below:

Wyoming Workers' Safety and Compensation Division

510 E. Pershing Blvd.

Cheyenne, WY 82002


Steve Czoschke, Administrator

Ph: 307-777-5110

FAX: 307-777-5524


Wyoming Workers' Safety (OSHA)

1510 E. Pershing Blvd., West Wing

Cheyenne, WY 82002

Phone: 307-777-7786


J.D. Danni, OSHA Program Manager
Ken Masters, Compliance Supervisor
Edward Carlson, Consultation Supervisor

The Wyoming OSHA website can be found at:

http://wyomingworkforce.org/businesses/osha/

We offer OSHA accepted 10 hour training for both segments and OSHA 30 hour training for the construction industry only. Upon successful completion of the 10 hour or 30 hour OSHA Outreach course, you will be able to immediately print a temporary certificate of completion. You will also be issued the official Department of Labor OSHA 10 hour or 30 hour card. The OSHA Outreach cards come directly to you within four to eight weeks of successful completion of your course via US mail.

OSHA has issued a new policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 10 hour and 30 hour courses. As a result, all 10 hour courses must be delivered over a minimum of two days and all 30 hour courses must be delivered over a minimum of four days.

In addition, OSHA has also issued a new policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

panel 1
panel 2